BASIC CAR
-87 FORD Mustang LX Convertable.  Third Owner since 1993.

MODIFICATIONS/UPGRADES

FRONT SUSPENSION
-MM Standard offset LCAs, Delrin busings
-Energy Suspension Sway Bar end links
-MM Sport Valved Bilstein struts   
-MM caster/camber plates
-Prothane urethane anti-sway bar bushings
-MM Coilover kit 350# springs

REAR SUSPENSION
-MM lower control arms
-MM Standard Duty torque Arm, racing crossmemeber
-MM Colover kit 250# springs 
-MM Sport valved Bilstein shocks
-MM Panhard bar

BRAKE SYSTEM
-15/16" bore 94 Mustang cobra brake master cylinder
-95 Cobra Brake Booster
-Wilwood adjustable proportioning valve
-factory proportioning valve fully bypassed (removed)
-FMS M2450 plug for prop valve

     BRAKES, FRONT
     -94 spindles
     -Cobra 13" rotors
     -01 Bullitt PBR dual piston calipers 1R3Z 2B121 AA and 1R3Z 2b120 AA
     -goodridge braided stainless brake hoses
     -Performace Friction Z Rated carbon-kevlar pads
     

     BRAKES, REAR
     -01 Bullitt Varga rear calipers
     -Cobra Caliper brackets     
     -Cobra 11.65" rotors
     -Moser 5 lug axles
     -goodridge braided stainless brake (center line only)
     -NAPA 95 Cobra rear brake hoses
     -ebrake cables (2) FMS M2809A ebrake cables (1)FMS M2810A center ebrake cable 


DRIVE TRAIN
-T5 5-speed
-Zoom Cobra clutch and pressure plate
-FMS aluminum drive shaft
-BBK aluminum quadrant and adjustable cable
REAR AXLE
-03-04 Traction Lock differential, carbon clutch packs
-3.55 gears
-Amsol 75-90NS fluid, ford friction modifier

ENGINE 
-Stock short block
-MAC 1 5/8 equal length shorty headers
-Bassani Hi Flow x-pipe
-Flowmaster 2 chamber mufflers
-2.5" diameter flowmaster exhaust
-K&N cone air cleaner
-MobIl 1 synthetic oil
-March Pulleys
-March Ram Air
-190 LPH fuel pump (installing soon)
-Romac Harmonic Ballancer
-
STEERING
-MM AL rack bushings
-Flaming Riiver hibrid Steering shaft 
-03 Cobra PS rack
-Steering Rack Limiters N804842-S
-92 Taurus Tie rod ends

TIRES/WHEELS
Street:
-99 Cobra 17 x 8 wheels
-245/45-17 Kumho 712s
AutoX:
-95 Cobra R, 17 x 9 wheels: M50 front, M179 Rear
-275/40-17 Falken Azennis RT-615

OTHER
-MM Full length sub frame connectors, welded in
-Kenny Brown 4 Point K frame Brace
-MM Strut tower brace


-------------------------------------------------------------------------------
Engine Mods on deck:
-Holley Systmeax AL heads 2.02 intakes 20deg valve angle (coming soon)
-MAF conversion w/24# injectors, A9P computer, & 73mm C&L MAF (coming soon)
-FTI custom cam (coming soon)
-Holley Adjustable Fuel pressure regulator (coming soon)
-McLeod AL Flywheel (coming soon)
------------------------------------------------------------


sold:
-Explorer upper & lower intake (coming soon)
-65mm ?? EGR spacer (coming soon)
-65mm Ford throttle body (coming soon)
-1.6 Proform roller rockers (coming soon)